Install the integrated power supply module (PDM)

NOTE: To provide a better overview: Shown without DME control unit.

Insert the integrated power supply module (PDM) (1) into the holder and lock the lock (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Connect all connectors (1) to the integrated power supply module (PDM) and lock audibly.

G14240908

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING COVER FOR THE RIGHT DME CONTROL UNIT .
Refer to INSTALLING THE FRONT-END STRUT (US VERSION) .
Refer to INSTALLING THE RIGHT FRONT-END STRUT .
Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT CENTER .
Refer to CONNECTING ALL BATTERY GROUND LEADS .