Installing both headlights

Install headlight 

• Feed in and correctly position the headlight (3).
• Tighten down screws (1) and (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Front light combination, top
  screw	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Front light combination, bottom
  screw	Tightening torque	5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect plug (1).

Follow-up work 

• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to INSTALLING FRONT SECTION OF THE FRONT WHEEL ARCH COVER (PARTIALLY REMOVED) .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT CENTER .
• Refer to ADJUSTING HEADLIGHTS .