Removing the engine from the assembly jig

• Slacken nuts (1)  .
• Unlock the clamping jaws of the special tool 2 413 082  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Raise the engine slowly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the screws (1) and remove the special tool 2 449 395  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE RIGHT ENGINE MOUNT HOLDER .
• Refer to DETACHING THE ENGINE FROM THE WORKSHOP CRANE .
• Refer to INSTALLING THE AUTOMATIC TRANSMISSION (ON MOBILE LIFTING TABLE) .
• Refer to INSTALLING THE ENGINE SUPPORT ARMS ON THE ENGINE MOUNTS ON THE LEFT AND THE RIGHT .
• Refer to INSTALLING THE FRONT OUTPUT SHAFTS (ON THE MOBILE LIFTING TABLE) .
• Refer to INSTALLING THE CATALYTIC CONVERTER FOR CYLINDERS 7 TO 12 .
• Refer to INSTALLING THE CATALYTIC CONVERTER FOR CYLINDERS 1 TO 6 .
• Refer to INSTALLING THE COMPLETE FRONT AXLE WITH THE ENGINE AND TRANSMISSION .