Replacing the trims on the operating unit in the center console

removing trim panels on the operating facility in the center console 

• Press trim for the parking brake button (1) in the arrow direction, forward and downward.

Courtesy of BMW OF NORTH AMERICA, INC.

• Lever out the trim (2) with the special tool  0 493 681 (64 1 020) . 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lever out the trim (1) with the special tool  0 493 681 (64 1 020) . 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lever out the trim (1) with special tool  0 493 681 (64 1 020)  at the marked positions. 

Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the trims on the operating unit in the center console.

  Parts:  trims on the operating unit in the center console

installing the trims on the operating facility in the center console 

• Position trim (1) on the operating facility in the center console (2) and engage.

  All snap-in lugs must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position trim (1) and clip in.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position trim (1) on the operating facility in the center console (2) and engage it.

  All snap-in lugs must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the trim (1) for the parking brake button and lock in place in the arrow direction.

  The trim of the parking brake button (1) must lock audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SELECTOR LEVER .
• Refer to INSTALLING THE HDC BUTTON/TRIM .
• Refer to INSTALLING THE IDRIVE CONTROLLER .
• Refer to INSTALLING THE OPERATING FACILITY IN THE CENTER CONSOLE .
• Refer to INSTALLING THE CENTER CONSOLE TRIM .
• Refer to INSTALLING TRIM IN STORAGE COMPARTMENT OF CENTER ARMREST .
• Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48V ELECTRICAL SYSTEM .