Installing the selector lever

• Position the selector lever (1).
• Replace the screw (2).

  Parts:  screw

• Tighten down screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the ribbon cable (1) correctly on the selector lever (arrows).
• Lock the connector (2) in the arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the trim (1).

  Parts:  trim

• Position the trim (1) on the gearshift lever knob (2) and lock in place.

  Snap-in lugs must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48V ELECTRICAL SYSTEM .