Installing the grooved ball bearing in the propeller shaft center bearing

• Lubricate the rubber-coated bearing carrier of the propeller shaft center bearing (1)  with lubricant.
  CONSUMABLE SPECIFICATION
  
  

  Installation aid  (Circo Light; lubricant)

  250 ml, Bottle

  83192405829

• Press in the grooved ball bearing using special tools 0 492 262 (33 3 202)  and 0 492 263 (33 3 203)  into the propeller shaft center bearing (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CENTRAL MOUNTING OF THE PROP SHAFT .
• Refer to INSTALLING THE COMPLETE PROP SHAFT .
• Refer to INSTALLING THE HEAT SHIELD .
• Refer to INSTALLING THE COMPLETE EXHAUST SYSTEM .
• Refer to INSTALLING THE CONNECTING SUPPORTS ON THE TUNNEL .