Replacing the cushion for the backrest of the rear seat
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING LEFT AND RIGHT BACKREST SIDE SECTION .
- Refer to REMOVING THE RIGHT REAR SEAT BACKREST .
- Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to REMOVING THE CENTER REAR SEAT BACKREST .
- Refer to REMOVING REAR SEAT BACKREST, LEFT .
- Refer to REMOVING THE BACKREST COVERING WITH THE CUSHION FOR THE REAR SEAT .
- Refer to REMOVING THE BACKREST COVERING .
NOTE:
TECHNICAL INFORMATION
The heating mat is glued to the foam pad and cannot be dismantled nondestructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
The heating mat is glued to the foam pad and cannot be dismantled nondestructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Replace the cushion (2)
.
Parts: Upholstery
- Version with seat heating:
Position and align the heating mat (1) on the upholstery (2) .
Bond the heating mat (1) with the upholstery (2) .
Follow-up work
- Refer to INSTALLING THE BACKREST COVERING .
- Refer to INSTALLING THE BACKREST COVERING WITH THE CUSHION FOR THE REAR SEAT .
- Refer to INSTALLING THE LEFT REAR SEAT BACKREST .
- Refer to INSTALLING THE CENTER REAR SEAT BACKREST .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING THE REAR SEAT BACKREST .
- Refer to INSTALLING THE LEFT AND RIGHT BACKREST SIDE SECTION .
- Refer to INSTALLING THE REAR SEAT .