Installing the center rear seat backrest

Precondition 

Center rear seat backrest folded

• Position the center rear seat backrest (1)  at an angle of 90° to the left rear seat backrest (2)  .
• Install the center rear seat backrest (1)  in the arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the center bearing bracket (2)  correctly.
• Replace screws (1)  .

  Parts:  Screws

• Tighten the screws (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to INSTALLING THE REAR SEAT BACKREST .
• Refer to INSTALLING RIGHT BACKREST SIDE SECTION .
• Refer to INSTALLING THE REAR SEAT .