Install the roof-mounted antenna
- Locks (1) on the roof-mounted antenna (2) must be correctly fitted under the roof (3).
- Install the roof-mounted antenna (2) in the direction of the arrow.
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATION
| Roof-mounted aerial to roof outer skin | ||
|---|---|---|
| screw | Tightening torque | 4 Nm |
- Correctly position TCB (1) and push in arrow direction till the lock is engaged (2).
Follow-up work
- Refer to INSTALLING THE ROOF-MOUNTED ANTENNA HOUSING .
- Refer to INSTALLING THE REAR HEADLINING PARTIALLY .
- Refer to INSTALLING ALL GRAB HANDLES .
- Refer to INSTALLING THE LEFT AND RIGHT B-PILLAR TRIM PANEL PARTIALLY .
- Refer to INSTALLING D-PILLAR TRIM PANEL ON LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT C-PILLAR TRIM PANEL .
- Refer to INSTALLING COVER OF THE LUGGAGE COMPARTMENT SIDE SHELF LEFT AND RIGHT .
- Refer to INSTALLING THE FRONT STORAGE SHELF .