Replacing upper adapter for bumper trim panel

• Position the adapter (2)  .
• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Adapter to the front panel
  Oval-head screw with spring washer	tightening torque	4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
• Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
• Refer to INSTALLING THE FRONT HOOD SEAL .