Install the rear view camera (RFK)

• Check the sealing ring (1) for fit accuracy.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (2) and lock.
• Insert the rearview camera (RFK) (1) into the socket of the emblem.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Close the lid for the rearview camera (RFK) (2) in the arrow direction and clip in with the detents (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE VIBRATION ABSORBER ON THE TRUNK LID .
• Refer to INSTALLING THE TAILGATE TRIM PANEL .
• Refer to INSTALLING THE POWER TAILGATE SWITCH .
• Refer to INSTALLING TRIM FOR THE SIDES OF THE REAR WINDOW FRAME TO THE LEFT AND RIGHT .
• Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .
• Refer to INSTALLING THE REAR STORAGE SHELF .