Installing the ornamental grille on the front bumper cover on the side

Check 

• Check the detents (arrows) on the bumper cover for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The detents (arrows) are damaged.

Measure 

• Replace the front bumper cover.
• Attach and position the ornamental grille (1).
• Clip the ornamental grille (1) into the detents (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE RETAINING FRAME OF THE FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE BUMPER BRACKET .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
• Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
• Refer to INSTALLING THE FRONT HOOD SEAL .