Replacing the bumper cover

Preliminary work 

• Refer to REMOVING THE STORAGE SHELF .
• Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to REMOVING THE COVER FOR THE SIDE MEMBER ON THE RIGHT .
• Refer to REMOVING BATTERY COVER .
• Refer to REMOVING THE LOADING EDGE TRIM .
• Refer to REMOVING THE COVER OF THE SEAT BELT FINISHER STRIP ON RIGHT .
• Refer to REMOVING THE RIGHT D-PILLAR TRIM PANEL .
• Refer to REMOVING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
• Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
• Refer to REMOVING THE FLAP IN THE LUGGAGE COMPARTMENT TRIM PANEL ON THE RIGHT .
• Refer to REMOVING THE TAIL LIGHT ON THE LEFT AND RIGHT SIDE PANEL .
• Refer to REMOVING LEFT AND RIGHT REAR REFLECTORS .
• Refer to REMOVING THE REAR DIFFUSER .
• Refer to REMOVING THE TRIM ON THE LOWER BUMPER COVER .
• Refer to REMOVING THE REAR BUMPER COVER .
• Refer to REMOVING THE TRIM ON THE SIDE BUMPER COVER .
• Refer to REMOVING LEFT AND RIGHT EDGE BINDING FOR REFLECTOR .

Remount ultrasonic sensors 

• Unlock the detents (1)  .
• Remove the ultrasonic sensor (2)  towards the top.
• Remove all other ultrasonic sensors together with the wiring harness.
• Replace front ultrasonic sensor mount.

  Parts:  Front ultrasonic sensor mount

• Replace rear ultrasonic sensor mount.

  Parts:  Rear ultrasonic sensor mount

• Snap all ultrasonic sensors into the bumper.
• Secure wiring harness.

Courtesy of BMW OF NORTH AMERICA, INC.

• Remount the trim (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE EDGING FOR THE LEFT AND RIGHT REFLECTOR .
• Refer to INSTALLING THE TRIM ON THE SIDE BUMPER PANEL .
• Refer to INSTALLING THE REAR BUMPER COVER .
• Refer to INSTALLING THE TRIM ON THE LOWER BUMPER COVER .
• Refer to INSTALLING THE REAR DIFFUSER .
• Refer to INSTALLING THE LEFT AND RIGHT REFLECTOR .
• Refer to INSTALLING THE TAIL LIGHT ON THE LEFT AND RIGHT SIDE PANELS .
• Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT TRIM PANEL .
• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON RIGHT .
• Refer to INSTALLING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
• Refer to INSTALLING THE RIGHT D-PILLAR TRIM PANEL .
• Refer to INSTALLING THE COVER OF THE RIGHT BELT FEED TRIM .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE BATTERY COVER .
• Refer to INSTALLING THE COVER OF THE SIDE MEMBER ON THE RIGHT .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to INSTALLING THE STORAGE SHELF .