Removing the tail light on the left and right side panel
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing the tail light on the side panel
- Loosen nut (1).
- Unclip the cover of the water channel (1).
- Release screws (1) and guide out the tail light from side panel (2) in the arrow direction.
NOTE:
TECHNICAL INFORMATION
Observe the note on unlocking and disconnecting plug connections.
For additional information see: UNLOCKING AND DISCONNECTING DIFFERENT PLUG CONNECTIONS .
Observe the note on unlocking and disconnecting plug connections.
For additional information see: UNLOCKING AND DISCONNECTING DIFFERENT PLUG CONNECTIONS .
- Unlock plug connection (1) and disconnect.
- Remove the tail light on the side panel (2).