Installing the armrest on the door trim panel
NOTE:
Description is for left component only. Procedure on the right side is identical.
NOTE:
Welding pins must not protrude from the door trim panel.
- Screw in and tighten all marked repair screws (arrows).
TIGHTENING TORQUES SPECIFICATION
| Repair screw to door trim panel | ||
|---|---|---|
| TS4x10 screw | tightening torque | 1.6 Nm |
Follow-up work
- Refer to INSTALLING FRONT DOOR TRIM PANEL .
- Refer to MOUNTING TRIM OF DOOR HANDLE .
- Refer to MOUNTING MIRROR TRIANGLE COVER .