Install front door trim panel

Check the clips (1) for damage and replace where required.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip the door wiring harness (1) into the door trim panel (2) .
Connect door wiring harness connector (1) to door trim panel (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the Bowden cable of the door opener (1) on the door lock (3) .
Attach the Bowden cable of the door opener (1) on the counter support (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Maneuver the locking rod into door trim panel (1) through the opening.
Clip in the door trim panel (1) onto the clips (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten down screws (1) and (2) .

TIGHTENING TORQUES SPECIFICATION

Door trim panel
Oval-head screw	Tightening torque	3.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work