Installing the clean air pipe of cylinder bank 1
- Position clean air pipe of the cylinder bank 1 (2)
in arrow direction and slide it on.
The retaining clips (1) must snap-in audibly.
- Position the tank vent line (2)
and slide it on.
The tank ventilation line (2) must be audibly locked to the catch (1) .
Follow-up work
- Refer to INSTALLING RIGHT INTAKE SILENCER HOUSING .
- Refer to TIGHTENING THE FRONT-END STRUT ON THE RIGHT .
- Refer to INSTALLING THE COVER PANEL OF THE MASTER DME CONTROL UNIT .