Install the rear and center bumper trim

NOTE: TECHNICAL INFORMATION
Detents, guides and mounting elements must not be damaged or missing.

Attach the trim (2) and engage at the detents (arrows) of the bumper panel.
Mount the expanding rivets (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE REAR BUMPER COVER .
Refer to INSTALLING BOTH TAIL LIGHTS ON THE SIDE PANEL .
Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
Refer to INSTALLING LOADING EDGE TRIM .
Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .