Installing the luggage compartment wheel arch trim panel on the right

Feed in luggage compartment wheel arch trim panel (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the lashing point (2).

Tighten the associated bolt.

TIGHTENING TORQUES SPECIFICATION

Lashing point to body
	Tightening torque	19 Nm

G14196298

Courtesy of BMW OF NORTH AMERICA, INC.

Install trim (1).
Insert the cover (1).
Fasten the luggage compartment wheel arch trim panel (3) with the expanding rivet (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Correctly position the luggage compartment wheel arch trim panel (3) and connect it with the corresponding connector.
Secure expanding rivet (2).
Insert the cover (1).
Make sure the luggage compartment wheel arch trim panel (3) is correctly fitted at the edge protection of the trunk lid.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the lashing point (2).

Tighten the associated bolt.

TIGHTENING TORQUES SPECIFICATION

Lashing point to body
	tightening torque	19 Nm

G14196298

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in the cover (1).