Install the acoustic cover for the oil sump

• Insert and install the acoustic cover of the oil sump.
• Feed in all the expanding rivets (1)  in the marked area and install.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1)  .
• Make sure the connector (1)  engages audibly.
• Secure clamps (2)  .
• Insert and install the positive battery cable (4)  .
• Secure positive battery cable (4)  at the clamp (5)  .
• Tighten the nut (3)  hand-tight.

  Courtesy of BMW OF NORTH AMERICA, INC.

  CAUTION: Improper routing of the positive battery cable. 
  Risk of short circuits! 

  • Route the positive battery cable without abrasions and do not trap.
• Correctly  attach the positive battery cable (1)  to the anti-twist lock (2)  .
• Tighten nut (3)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR THRUST FIELD .
• Refer to INSTALLING FRONT STIFFENING PLATE .
• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .