Installing the shift paddle for the automatic transmission
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Insert the access line (1) into the rear of the steering wheel (2).
- Position the shift paddle (1) on the steering wheel (2).
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATIONS
| Shift paddle | ||
| Screw TS5x12 | Tightening torque | 2 Nm |
- Insert the cable and connect the connector (1).
Follow-up work
- Refer to INSTALLING THE AIRBAG UNIT OF THE STEERING WHEEL OR SPORTS STEERING WHEEL .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .