Installing the oil pressure switch

• Guide in and install oil pressure switch (1)  .
• Tighten the oil pressure switch (1)  with the special tool 0 496 106 (11 8 720). 
  TIGHTENING TORQUES SPECIFICATION
  
  

  Oil pressure switch to crankcase
  M12X1.5	tightening torque	16.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1)  and lock.

  The connector (1)  must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE STIFFENING PLATE .
• Refer to INSTALLING UNDERBODY PROTECTION AT REAR .
• Refer to CHECKING ENGINE OIL LEVEL .