Install front cross connection

• Feed in and install the front cross connection (2)  at the front screws.
• Attach the Bowden cable (1)  in the holder.
• Tighten the screws (arrows).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUE SPECIFICATION
  
  

  Front cross connection
  M8x20	tightening torque	19 Nm

• Tighten the screws (1)  with the special tool 2 471 857 .

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUE SPECIFICATION
  
  

  Front cross connection
  M8x20	tightening torque	19 Nm

• Mount and lock the radiator bracket (2)  .

Follow-up work 

• Refer to PARTIALLY INSTALLING THE MOUNTING FOR THE HOOD SEAL .
• Refer to INSTALLING THE FRONT HOOD SEAL .