Remove the windshield
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE VANITY MIRROR LIGHT AT THE FRONT LEFT AND RIGHT .
- Refer to REMOVING THE COUNTER SUPPORT FOR THE SUN VISOR .
- Refer to REMOVING THE ROOF FUNCTION CENTER (FZD) .
- Refer to REMOVING THE TOP WINDSHIELD PANEL TRIM (BOTTOM PART) .
- Refer to REMOVING THE A-PILLAR TRIM PANEL .
- Refer to REMOVING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
- Refer to REMOVING INSIDE MIRROR .
- Refer to REMOVING KAFAS CAMERA (MID VARIANT) .
- Refer to REMOVING BOTH EXTERNAL A-PILLAR TRIM PANELS .
- Refer to REMOVING LEFT AND RIGHT WIPER ARM .
- Refer to REMOVING THE COWL COVER .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Tape off the body around the piercing point with fabric adhesive tape.CONSUMABLE SPECIFICATION
Plastic adhesive tape 83195B3DD17 - Push the thread (1) through the adhesive bead (2) along the line from the inside.
- Cut out the windshield with the spider.
NOTE:
Schematic diagram is for example purposes Some parts may differ in certain details.