Installing the trunk lid handle

• Check the clips (1)  on the trunk lid handle (2)  for damage and replace if necessary.
• Check the seals (3)  on the trunk lid handle (2)  for damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

If installed: Connecting and locking connector (additional work with rearview camera) 

• Connect connectors (1)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (3)  and lock.
• Fit the trunk lid handle (1)  and clip it in with the clips (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screws (2)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Trunk lid handle
  Oval-head screw	tightening torque	2.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Close covers (1)  .