Installing lower part of rear spoiler
- Install the lower part of the rear spoiler (1) and clip in the clips (2).
- Tighten the bolts (1) and nuts (2).
TIGHTENING TORQUES SPECIFICATION
| Rear spoiler, lower part | ||
| Oval-head screw | Tightening torque | 8.0 Nm |
| Nut Replace nut |
Tightening torque | 8.0 Nm |
- Connect connectors (1) and lock.
- Install the AM antenna (2) in the holders.
- Connect and lock the washer fluid hose (3).
Follow-up work