Removing rear door window glass (fixed)
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Remove the rear door outer window CHANNEL STRIP .
- Remove rear door TRIM PANEL .
- Remove the window frame rear inside COVER .
- Remove the window inner rear door CHANNEL STRIP .
- Pull the rubber window seal (1) out of the window guide rail (2).
- Loosen screws (1).
- Remove the window guide rail (2) from the door.
- Remove the seal plug (1).
- Loosen screw (2).
- Loosen screw (1).
- Unclip the door window glass (2) out of the door at the top.
- Guide the door window glass (2) out of the door to the top.