Removing the coolant feed line part 2 between the auxiliary coolant pump and exhaust turbocharger

Preliminary work 

• Refer to REMOVING SUSPENSION STRUT BRACE .
• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING THE FRONT-END STRUT .
• Refer to REMOVING THE RIGHT INTAKE FILTER HOUSING (FRONT-END STRUT REMOVED) .
• Refer to REMOVING THE CLEAN AIR PIPE FOR CYLINDERS 1 TO 3 .
• Refer to REMOVING CLEAN AIR PIPE CYLINDERS 4-6 .
• Refer to PARTIALLY REMOVING THE COOLANT EXPANSION TANK OF THE HIGH-TEMPERATURE COOLANT CIRCUIT .
• Refer to REMOVING THE FRONT SPOILER .
• Refer to REMOVING THE FRONT UNDERBODY PROTECTION .
• Refer to REMOVING THE LEFT AND RIGHT FRONT UNDERSHIELD .
• Refer to REMOVING THRUST FIELD .
• Refer to REMOVING THE RIGHT HAND FRONT BOTTOM SIDE COVER .
• Refer to DRAINING THE COOLANT FOR THE HIGH-TEMPERATURE COOLANT CIRCUIT .
• Refer to CONNECTING THE COOLANT LINE TO THE RADIATOR .

• Feed out the connector (1)  and (2)  in arrow direction from the carrier plate (3)  and set it aside.
• Unlock plug connection (1)  and disconnect.
• Guide out the cable (4)  along the arrows and set aside.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1)  and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock and release the coolant feed line (1)  part 2 at the auxiliary coolant line (2)  .
• Catch and dispose of escaping coolant.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen the screws (1)  and (2)  .
• Guide out the coolant feed line (3)  part 2 and set aside.
• Catch and dispose of escaping coolant.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1)  .
• Guide out the coolant feed line (2)  part 2 and set aside.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide out and remove the coolant feed line (1)  part 2 from the clamp (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.