51 22 001 Replacing door detent (lock striker), rear left or right

Bottom lock striker:

Release screws (1).

Remove lock striker (2).

Tightening torque 51 22 4AZ .

After installation:

Fig 1: Identifying Lock Striker And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Top lock striker:

Pull off cover (1) in direction of arrow.

Fig 2: Pulling Off Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove lock striker (2).

Tightening torque 51 22 3AZ .

After installation:

Fig 3: Identifying Lock Striker And Screws

Courtesy of BMW OF NORTH AMERICA, INC.