51 45 291 Removing and installing (replacing) glove box trim

Special tools required: 

• 00 9 340

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary tasks: 

• Remove GLOVE BOX 

Release screws (1).

Fig 1: Identifying Glove Box Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully lever out trim (1) from latch mechanisms (2) using special tool 00 9 340 and remove.

Installation note: 

Catches (2) must not be damaged or missing.

Fig 2: Removing Trim From Latch Mechanisms Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.