LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> i3 s >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair - All I3 Models >> Floor/Luggage Compartment/Engine Compartment Trim Panels >> 51 47 104 Removing and installing/replacing luggage compartment service cap

51 47 104 Removing and installing/replacing luggage compartment service cap

Necessary preliminary tasks: 

Release screws and remove service cap upwards.

Tightening torque 51 47 4AZ .

IMPORTANT: The neoprene nuts are damaged if specified torque is exceeded.
This can lead to rattling of service cap.
Fig 1: Locating Luggage Compartment Service Cap Neoprene Nuts
G11145052Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Check gasket (1) and neoprene nuts (2) for damage and replace, if necessary.

Fig 2: Identifying Gasket And Neoprene Nuts
G11145063Courtesy of BMW OF NORTH AMERICA, INC.