51 11 157 Replace bumper panel, front
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove FRONT BUMPER PANEL
Remount the following parts:
- BUMPER TRIM PANEL UPPER SECTION
- LICENSE PLATE BASEPLATE
- SIDE GRILLE
- TOP (UPPER) GRILLE
- Fog lights . See 63 17 070 REMOVING AND INSTALLING/REPLACING LEFT FOG LIGHT or 63 17 075 REMOVING AND INSTALLING/REPLACING RIGHT FRONT FOG LIGHT , and ADJUST after fitting
- WIRING HARNESS
- Ultrasonic sensor . See 66 20 518 REMOVING AND INSTALLING/REPLACING A FRONT (SIDE) ULTRASONIC SENSOR or 66 20 520 REMOVING AND INSTALLING/REPLACING A FRONT ULTRASONIC SENSOR (CENTER)
- Protective cap for towing eye
- BRACKETS FOR FOG LIGHTS
Only for X-Line version: