51 11... Removing and installing/replacing front bumper trim cover (X line)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Tightening torque 51 75 1AZ .

Fig 1: Identifying Bumper Trim Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release latch mechanisms (1) and remove cover (2) towards front.

Fig 2: Releasing Bumper Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Latch mechanisms (1) on cover (2) must not be damaged or missing.

Fig 3: Identifying Bumper Trim Cover Latch Mechanisms And Cover

Courtesy of BMW OF NORTH AMERICA, INC.