Install the actuator on the hood hinge
WARNING:
Pyrotechnic components
.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .
NOTE:
TECHNICAL INFORMATION
Notes on the active pedestrian protection are a fundamental requirement for these repair instructions and must be complied with at all times.
For additional information see: PROCEDURE FOR VEHICLES WITH ACTIVE PEDESTRIAN PROTECTION AFTER AN ACCIDENT .
Notes on the active pedestrian protection are a fundamental requirement for these repair instructions and must be complied with at all times.
For additional information see: PROCEDURE FOR VEHICLES WITH ACTIVE PEDESTRIAN PROTECTION AFTER AN ACCIDENT .
- Feed in and install the actuator (3).
- Tighten down screw (2).TIGHTENING TORQUE SPECIFICATIONS
Actuator to engine compartment lid hinge M6x12 screw Tightening torque 6.8 Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to CONNECTING THE BATTERY EARTH LEAD .