Installing the head-up display
- Connect connector (1)
on underside of head-up display (2)
and lock.
- Correctly position the Head-up Display (2) on the support (3) .
- Tighten down screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Head-Up Display to support Screw Tightening torque 8 Nm
Follow-up work
- Refer to INSTALLING INSTRUMENT PANEL TRIM .
- Refer to INSTALLING THE LEFT FOLD-DOWN COMPARTMENT .
- Refer to INSTALLING THE INSTRUMENT CLUSTER (KOMBI) .
- Refer to INSTALLING THE STEERING COLUMN SWITCH CLUSTER (SZL) .
- Refer to INSTALLING STEERING COLUMN SHROUD LOWER SECTION .
- Refer to FITTING STEERING COLUMN SHROUD UPPER SECTION .
- Refer to INSTALLING THE STEERING WHEEL/SPORTS STEERING WHEEL .
- Refer to INSTALLING AIRBAG UNIT OF STEERING WHEEL/SPORTS STEERING WHEEL .
- Refer to INSTALLING SIDE TRIM PANEL IN FOOTWELL ON RIGHT A-PILLAR .
- Refer to INSTALLING THE FRONT RIGHT DOOR SILL COVER STRIP .
- Refer to INSTALLING SIDE TRIM PANEL IN THE FOOTWELL AT A-PILLAR .
- Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .
- Refer to INSTALLING THE LEFT AND RIGHT A-PILLAR TRIM PANELS .
- Refer to INSTALLING THE LIGHT OPERATING UNIT .
- Refer to INSTALLING THE START-STOP BUTTON .
- Refer to INSTALLING DECORATIVE STRIP FROM INSTRUMENT PANEL .
- Refer to INSTALLING THE HEAD UNIT HIGH (HU-H) .
- Refer to INSTALLING THE MID-RANGE SPEAKERS IN THE INSTRUMENT PANEL .
- Refer to INSTALLING AUDIO OPERATING UNIT AND AIR CONDITIONING CONTROL PANEL .
- Refer to INSTALLING THE FINISHER ON THE RIGHT INSTRUMENT PANEL .
- Refer to INSTALLING RIGHT GLOVE COMPARTMENT .
- Refer to INSTALLING KNEE AIRBAG .
- Refer to INSTALLING THE SIDE PANEL ON INSTRUMENT PANEL ON THE LEFT AND RIGHT .
- Refer to INSTALLING CENTER CONSOLE FULLY WITH CENTER ARMREST .
- Refer to INSTALLING THE FRONT STORAGE COMPARTMENT .
- Refer to INSTALLING THE CENTER CONSOLE TRIM .
- Refer to INSTALLING THE DECORATIVE TRIM TO THE CENTER CONSOLE .
- Refer to INSTALLING THE GEARSHIFT LEVER COVER .
- Refer to INSTALLING SIDE TRIM PANEL FOR THE LEFT AND RIGHT CENTER CONSOLE .
- Refer to INSTALLING THE BOTTOM RIGHT INSTRUMENT PANEL TRIM .
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to CONNECTING THE BATTERY EARTH LEAD .
- Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .