Replacing slide sunroof frame (M4 Coupe)
IMPORTANT:
Make sure operations sequence is followed without exception. (Risk of damage).
Necessary preliminary work:
- Remove GLASS SLIDE/TILT SUNROOF PANEL .
- Remove COMPLETE GLASS SLIDE/TILT SUNROOF .
- Remove WIND DEFLECTOR .
- Remove DRIVE UNIT WITH TRANSMISSION .
- Remove WATER GUTTER .
- Remove HEADLINING FRAME .
Installation note:
We recommend following the installation sequence of operations 6 to 1.
- ADJUSTING GLASS SLIDE/TILT SUNROOF PANEL .
- INITIALIZE glass slide/tilt sunroof