Removing and installing/replacing front left or right crash-active headrest (Convertible)
WARNING:
Comply with the safety information on HANDLING AIRBAG MODULES AND PYROTECHNICAL SEAT BELT TENSIONERS
.
Incorrect handling may result in triggering of the crash-active headrest and thereby cause injury.
Incorrect handling may result in triggering of the crash-active headrest and thereby cause injury.
Switch off the ignition!
Necessary preliminary work:
- Disconnect BATTERY NEGATIVE CABLE .
- Partially remove backrest cover. Refer to REPLACING BACKREST COVER (SPORT) FOR DRIVER'S SEAT or REPLACING BACKREST COVER (SPORT) FOR FRONT PASSENGER SEAT .
Starting situation:
Head restraint is in the crash position after activation.
A triggered head restraint can be recognized by the padded section which has moved upwards.
Unlock and disconnect PLUG CONNECTION (1).
Release cable strap (1).
Unfasten plug connection (2) and disconnect.
Push head restraint (1) upwards.
Operate latch mechanism (2) and remove head restraint towards the top.
Remove the accompanying plug connection towards the top.