Removing the seat-position sensor on the front seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE FRONT STRAP FITTING .
- Refer to REMOVING FRONT SEAT .
- Release cable tie (1)
.
- Unlock the connectors in the sequence (1)
to (4)
and pull them out of the connector housing (5)
one after the other in the direction of the arrow.
- Detach the cable bracket (1) from the seat mechanism.
- Put the cable (2)
to one side.
- Loosen screw (1) .
- Guide the seat-position sensor (2)
upward from the seat mechanism (3)
and remove it.