Install the seat position sensor on the front seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Guide in and correctly position the seat position sensor (2) from above on the seat mechanism (3) .
- Tighten down screw (1)
.TIGHTENING TORQUE SPECIFICATIONS
Sensor on seat mechanism Screw tightening torque 1.3 Nm - Correctly position the cable (2) .
- Fasten the cable bracket (1)
on the seat mechanism.
- Correctly insert and lock the connector plugs one after another in the order (1)
to (4)
in the direction of the arrow in the connector plug housing (5).
- Secure cable tie (1)
.
Follow-up work
- Refer to INSTALLING FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .