Installing the outer cover on the front seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position it at the outer edge of the front seat (2) and thread it into the bracket (3) in arrow direction.
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Outer trim to front seat Screw tightening torque 1.5 Nm
Follow-up work
- Refer to INSTALLING THE LEVER FOR THE SEAT HEIGHT ADJUSTMENT .
- Refer to INSTALLING THE STEERING LEVER FOR ADJUSTING THE BACKRESTS .
- Refer to INSTALLING THE COVER FOR THE BACKREST ADJUSTMENT .
- Refer to INSTALLING FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .