Install the outer cover on the front seat (mechanical)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- If necessary, connect existing plug connections.
- Attach the cover (1) on the guides (3) at the front.
- Lift the cover (1)
in area (A) over the shaft (2)
.
- Tighten down screw (1).TIGHTENING TORQUE SPECIFICATIONS
Outer trim to front seat Screw Tightening torque 1.5 Nm - Fasten expanding rivet (2)
.
Follow-up work
- Refer to INSTALLING BACKREST ADJUSTMENT LEVER ON FRONT SEAT .
- Refer to INSTALLING THE LEVER FOR THE SEAT HEIGHT ADJUSTMENT ON FRONT SEAT .
- Refer to INSTALLING FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .