Installing Bonnet Hinge

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Position the bonnet hinge (2).

Renew screws (1).

Parts: Screws

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Engine compartment lid hinge to body
Hexagon screw M8 Renew screw.
	Tightening torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Secure the brackets (arrows) and jet chain (1) at the hinge.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING FRONT WINDSHIELD PANEL COVER .
Refer to INSTALLING THE REAR HOOD SEAL .
Refer to INSTALLING THE GAS PRESSURE SPRING FOR ENGINE COMPARTMENT LID .
Refer to INSTALL HOOD .
Refer to INSTALLING JET CHAIN PARTIALLY .