Attach rear spoiler

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Check clips (1) on the rear spoiler (2) for damage, replace if required.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the rear spoiler (1) on the guides (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Slide the rear spoiler (1) onto the lower section of the rear spoiler in the direction of the arrow.
Clip in the rear spoiler (1) with the clips (2) and clip on the latch mechanisms (3) on both sides.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Rear spoiler to trunk lid
Oval-head screw	Tightening torque	3.1 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Insert the covers (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .