Install rear seat belt in the center
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Clean all threaded belt connections with micro-encapsulated outer and internal threads.
Shavings or other debris must not remain in the components.
If a microencapsulated screw is reused, it must be coated with the following screw locking agent: Loctite 243, medium strength .
The screw connection must be completed within 10 minutes as hardening begins after this period.
Clean all threaded belt connections with micro-encapsulated outer and internal threads.
Shavings or other debris must not remain in the components.
If a microencapsulated screw is reused, it must be coated with the following screw locking agent: Loctite 243, medium strength .
The screw connection must be completed within 10 minutes as hardening begins after this period.
NOTE:
TECHNICAL INFORMATION
Component is encoded against incorrect assembly.
Component is encoded against incorrect assembly.
- Mount the inertia reel (2) .
- Tighten down screw (1)
.TIGHTENING TORQUE SPECIFICATIONS
Rear seat belt retractor to body M10 screw Tightening torque 42 Nm - Mount seat belt guide loop (2) .
- Tighten down screw (1)
.TIGHTENING TORQUE SPECIFICATIONS
Rear seat belt guide loop to body Oval-head screw M10 42 Nm
Follow-up work
- Refer to INSTALLING THE HEADLINING (LOWERED) .
- Refer to INSTALLING THE BELT FEED TRIM .
- Refer to INSTALLING THE TOP LEFT AND RIGHT B-PILLAR TRIM PANELS .
- Refer to INSTALLING THE LEFT AND RIGHT A-PILLAR TRIM PANELS .
- Refer to INSTALLING THE ROOF FUNCTION CENTER .
- Refer to INSTALLING THE COUNTER SUPPORTS FOR THE SUN VISOR ON LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT SUN VISORS .
- Refer to INSTALLING THE COVER ON THE INSIDE MIRROR .
- Refer to INSTALLING ALL GRAB HANDLES .
- Refer to INSTALLING THE TRIM PANEL FOR LEFT AND RIGHT THE LUGGAGE COMPARTMENT CAPPING .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
- Refer to INSTALLING C-PILLAR TRIM PANEL AT BOTTOM LEFT AND RIGHT .
- Refer to INSTALLING THE DOOR SILL COVER STRIP ON THE REAR LEFT AND RIGHT .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
- Refer to INSTALLING TOOLKITS .
- Refer to INSTALLING THE EMERGENCY WHEEL .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .