Install the rear side seat belt

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Clean all threaded belt connections with micro-encapsulated outer and internal threads.
Shavings or other debris must not remain in the components.
If a microencapsulated screw is reused, it must be coated with the following screw locking agent: Loctite 243, medium strength .
The screw connection must be completed within 10 minutes as hardening begins after this period.

Feed in and position the inertia reel (2) .

Tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Rear seat belt retractor to body
M10 screw	Tightening torque	42 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Insert the cover (4) .
Connect plug connection (3) and lock.
Mount seat belt guide loop (2) .

Tighten down screw (1) .

TIGHTENING TORQUE SPECIFICATIONS

Seat belt guide loop on C-pillar
Oval-head screw	M10	42 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE TRIM PANEL FOR THE LUGGAGE COMPARTMENT CAPPING .
Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
Refer to INSTALLING THE BOTTOM C-PILLAR TRIM PANEL .
Refer to INSTALLING THE REAR DOOR SILL COVER STRIP .
Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
Refer to INSTALLING TOOLKITS .
Refer to INSTALLING THE EMERGENCY WHEEL .
Refer to INSTALLING LOADING EDGE TRIM .
Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .
Refer to CONNECTING THE BATTERY EARTH LEAD .