Installing the central rear lower strap
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Clean all threaded belt connections with micro-encapsulated outer and internal threads.
Shavings or other debris must not remain in the components.
If a microencapsulated screw is reused, it must be coated with the following screw locking agent: Loctite 243, medium strength .
The screw connection must be completed within 10 minutes as hardening begins after this period.
Clean all threaded belt connections with micro-encapsulated outer and internal threads.
Shavings or other debris must not remain in the components.
If a microencapsulated screw is reused, it must be coated with the following screw locking agent: Loctite 243, medium strength .
The screw connection must be completed within 10 minutes as hardening begins after this period.
- Insert lower strap (1)
.NOTE: TECHNICAL INFORMATION
Component is encoded against incorrect assembly. - Make sure the retaining lug (1)
is positioned correctly.
- Press the upholstery (1) to the side.
- Tighten down screw (2)
.TIGHTENING TORQUE SPECIFICATIONS
Lower strap to seat structure M10 screw Replace screw Tightening torque 42 Nm
Follow-up work
- Refer to INSTALLING THE REAR SEAT BENCH .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
- Refer to INSTALLING TOOLKITS .
- Refer to INSTALLING THE EMERGENCY WHEEL .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .