Installing tandem brake master cylinder (production date from 10/2015)

• Insert the tandem brake master cylinder (1) into the brake booster.
• Replace nuts (2).

  Parts:  Nuts

• Place and tighten nuts (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Tandem brake master cylinder in the brake booster
  M8 Replace nuts.	Tightening torque	27 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fit brake lines (3) and tighten.

Follow-up work 

• Refer to INSTALLING THE EXPANSION TANK (PRODUCTION DATE FROM 10/2015) .
• Refer to INSTALLING TENSION STRUT ON SHOCK TOWER .
• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to CONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .
• Refer to FLUSH AND VENTING THE REAR AXLE BRAKE CIRCUIT .
• Refer to FLUSH AND BLEEDING THE FRONT AXLE BRAKE CIRCUIT (HIGH BRAKE) .
• Refer to DISCONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .