11 41 000 Removing and installing/replacing oil pump: Notes

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work

Refer to LOWERING FRONT AXLE SUPPORT
Refer to REMOVING THE OIL FILLER CAP
Release the oil drain plug
Refer to REMOVING STARTER MOTOR
Refer to REMOVING OIL SUMP

Follow-up work

Refer to REFITTING ENGINE OIL PAN
Tighten the oil drain plug to 25 Nm.
NOTE: Replace the sealing ring.
Refer to INSTALLING STARTER MOTOR
Refer to RAISING FRONT AXLE SUPPORT
Check engine oil level
Top up the engine oil, as necessary