REP-TAT-P-1241-02 Installing starter motor
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Prerequisite
Battery earth lead is disconnected.
- Mount the starter motor (2).
- Tighten the screws (1).TIGHTENING TORQUES SPECIFICATION
Starter mounting to engine M8x60 Tightening torque 19 Nm - Mount the positive battery cable on the starter motor.
- Tighten the nut and mount the cover (1).TIGHTENING TORQUES SPECIFICATION
Battery positive lead to starter Cap nutM8 Tightening torque 13.5 Nm - Mount the cable (terminal 50) on the starter motor and tighten the nut (2).
TIGHTENING TORQUES SPECIFICATION
| Terminal 50 to starter motor | ||
|---|---|---|
| M6 hexagon nut | Tightening torque | 7 Nm |