11 13 000 Remove and install, seal or replace oil sump: Notes
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to LOWERING FRONT AXLE SUPPORT
- Refer to REMOVING THE OIL FILLER CAP
- Release the oil drain plug
- Refer to REMOVING STARTER MOTOR
Follow-up work
- Tighten the oil drain plug to 25 Nm. NOTE: Replace the sealing ring.
- Refer to INSTALLING STARTER MOTOR
- Refer to RAISING FRONT AXLE SUPPORT
- Check engine oil level
- Top up the engine oil, as necessary